Stored Cut Settings

Easel Pro users can save their custom cut settings, having them automatically populate for projects with the same material and bit combination. In time, your carve settings and post-carve feedback will help Easel calculate better settings for all users.

Note: Easel Pro subscribers can take full advantage of stored cut settings by using the custom bits and materials in their Toolbox. Bits and materials in your Easel Pro Toolbox with stored custom cut settings will auto-populate for your projects. This streamlines the carve set-up process and improves your project workflow.

Saving Cut Settings (Easel Pro Feature)

If you are an Easel Pro monthly or annual subscriber, your cut settings can now be saved and automatically applied to future projects. Whenever you select a material and bit combination, the cut settings used for the carve can be saved to your Easel Pro account.

Your saved cut settings will automatically be applied to new Easel Pro projects that use the same material and bit combination. Additionally, Easel Pro users can also choose to apply stored cut settings to past projects with the same material and bit combination.

If you are an Easel free day or day pass user, you can only save cut settings when using a free day or day pass. Similarly, only by using an Easel Pro free day or day pass will your cut settings automatically populate. Your saved settings will not automatically populate if you are using Easel without activating an Easel Pro free day or day pass.

At the end of a carve, Easel will ask if you want to save the cut settings you just used:

The panel shows both the recommended settings and the custom settings you used on the carve. Review the two options and confirm which cut settings you want to save.

Remember: If you are using an Easel Pro Free Day or Day Pass, your custom settings can be saved. However, your saved cut settings only populate automatically when you have activated an Easel Pro Free Day or Day Pass.

If your custom cut settings worked well, select "Current Settings" to use these settings as the default for future carves using this bit/material pairing when you have an active an Easel Pro account or use a Free day or Day Pass. Click "Save" to save.

If you were not happy with your cut settings and do not want to use them next time, select "Don't Save" or close the modal. The "Recommended Settings" will be used as the default cut settings the next time you carve with this bit/material pairing.

Tip: Even if you don't save your custom settings, you can tell Inventables how your carve turned out using the two options at the bottom of the pop-up. This helps us recommend better settings to other users.

You must complete a carve using a given bit/material pairing in order to save these cut settings for future carves. In other words, you cannot yet add in bit/material cut settings for specific pairings without completing a carve that uses those custom settings.

Auto-Populating Cut Settings (Easel Pro Feature)

Once you have saved cut settings from an Easel Pro carve, those settings will automatically populate in new Easel Pro projects for the same bit and material combination. Using the above example ---African Mahogany and the ⅛" teal Inventables bit---you can see that these saved settings auto-populate with an Easel Pro account when this bit/material pairing is selected in a new Easel Pro project:

If you'd like, you can change the auto-populated settings by entering new values for feed rate, plunge rate, and depth per pass.

As a reminder, If you are using an Easel Pro Free Day or Day Pass, your custom settings can be saved. However, your saved cut settings will only automatically populate when you have activated an Easel Pro Free Day or Day Pass.

Additionally, saved cut settings will only auto-populate when you select the same bit and material used in a previous completed carve. Only custom cut settings that are saved after completing a carve will auto-populate; you must complete a carve in order to save custom cut settings.